SLX Boosted Pressure Venturi Foam & Rinse, 2-Station

SLX-BP-MS2-RN-VF Boosted Pressure Venturi Foamer & Rinse, Multi-Station Assembly

The SLX Boosted Pressure Foam and Rinse multi-station provides an all in one set up to quickly and effectively foam and rinse off equipment using boosted water pressure (125-350 PSI) all from one location. This decentralized cleaning system uses a water driven venturi effect to dilute concentrated chemistry or cleaning solution into the foamer. Both the foamer and rinse station are securely mounted onto a stainless-steel wall bracket for easy installation. The mount features a large door to cover critical components, there is also a padlock hole to restrict access if necessary.

The foamer features the same split body design as our single station set-ups to make servicing and maintenance a breeze. Just unclamp the two sections using the stainless-steel tri-clamp to separate the upper and lower halves to gain access to the venturi insert cartridge.

Features

• Split body design for easy servicing and maintenance (patent pending)
• Tool free disassembly (even the check valves and plumbing components)
• Produces more foam using less chemistry 
• Large fan nozzle for efficient foam spray coverage
• Adjustable consistency (dry vs. wet foam)
• Heavy duty, durable construction
• Lockable stainless-steel cover
• Includes pressure gauges for air/water
• Large stainless steel ball valves at inlet and outlet with ½” NPT connections

What's in the box?

• Stainless Steel Venturi Sanitizer with V56 insert (5.6 GPM max flow rate)
  • 3/4" x 50' blue hose
    • Spray nozzle with trigger-pull handle
• Stainless Steel rinse stations (13.7 GPM max flow rate)
  • 1/2" x 50' blue hose 
  • Includes spray nozzle with trigger-pull handle
• Stainless steel mounting bracket and cover
• Color coded metering tips (22 metering tips, including driver)
• 6' suction line with mesh screen and ceramic weight

Install

1. Mount system to suitable surface using included bracket (i.e. wall or mounting board)
2. Connect the discharge hose and wand assembly (included) to the dispense/discharge port at the bottom of each system
3. Connect water supply to top of the system (3/4" NPT)
4. Connect air supply to foamer
5. Install metering tip
6. Install chemical suction lines (included)
7. Verify pressure setting for optimal flow rates
8. Open ball valves as necessary for each system to foam and rinse from one location

Specifications

Documentation

• Spec Sheet
• User Manual
• Quick Start Guide