SLX Boosted Pressure Venturi Airless Foam, Rinse & Sanitize, 3-Station

SLX-BP-MS3-VS-RN-VA Boosted Pressure Venturi Sanitize Sprayer, Rinse, and Airless Foamer, Multi-Station Assembly

The SLX Boosted Pressure Sanitize, Rinse, and Airless Foam multi-station provides an all in one set up to quickly and effectively foam, rinse, and sanitize equipment using boosted water pressure (125-350 PSI) all from one hose drop location. This decentralized cleaning system uses a water driven venturi effect to dilute concentrated chemistry or cleaning solution into the foamer and sanitizer, each individually. Both the foamer and sanitizer are securely mounted onto a stainless-steel wall bracket for easy installation. The mount features a large door to cover critical components, there is also a padlock hole to restrict access if necessary.

The foamer and sanitizer assemblies both feature the same split body design as our single station set-ups to make servicing and maintenance a breeze. Just unclamp the two sections using the stainless-steel tri-clamp to separate the upper and lower halves to gain access to the venturi insert cartridge.

Features

• Split body design for easy servicing and maintenance (patent pending)
• Tool free disassembly (even the check valves and plumbing components)
• Produces more foam using less water
• Large fan nozzle for efficient foam spray coverage
• Heavy duty, durable construction
• Lockable stainless-steel cover
• Large stainless steel ball valves at inlet

What's in the box?

• Stainless Steel Venturi Sanitizer with V56 insert (5.6 GPM max flow rate)
  • 3/4" x 50' blue hose
    • Spray nozzle with trigger-pull handle
• Stainless Steel rinse stations (13.7 GPM max flow rate)
  • 1/2" x 50' blue hose 
  • Includes spray nozzle with trigger-pull handle
• Stainless Steel Airless Venturi Foamer with V28 insert (2.8 GPM max flow rate)
  • 3/8" x 50' blue hose
  • Stainless steel airless foam wand with trigger-pull handle
• Stainless steel mounting bracket and cover
• Color coded metering tips (2x sets of 22 metering tips, including driver)
• 6' suction line with mesh screen and ceramic weight (2x)

Install

1. Mount system to suitable surface using included bracket (i.e. wall or mounting board)
2. Connect the discharge hoses and wands (included) to the dispense/discharge port at the bottom of each system
3. Connect water supply to top of the system (3/4" NPT)
4. Install metering tips to each individual hose barb
5. Install chemical suction lines (included)
6. Open ball valves as necessary for each system to foam and sanitize

Specifications

Documentation

• Spec Sheet
• User Manual
• Quick Start Guide