Description
SLX Venturi Foam & Foam, Multi-Station - Polypropylene
The SLX Foam & Foam multi-station provides an all in one set up to quickly foam and effectively clean equipment using standard water pressure (35-125 PSI) all from one location using two separate discharge hoses. This low to medium volume decentralized cleaning system uses a water driven venturi effect to dilute concentrated chemistry or cleaning solution into the foamer and sanitizer, each individually. Both the foamer and sanitizer are securely mounted onto a stainless-steel wall bracket for easy installation. The mount features a large door to cover critical components, there is also a padlock hole to restrict access if necessary.
The foamer assemblies both feature the same split body design as our single station set-ups to make servicing and maintenance a breeze. Just unclamp the two sections using the stainless-steel tri-clamp to separate the upper and lower halves to gain access to the venturi insert cartridge.
Features
- Split body design for easy servicing and maintenance (patent pending)
- Tool free disassembly (even the check valves and plumbing components)
- Produces more foam using less chemistry
- Large fan nozzle for efficient foam spray coverage
- Adjustable consistency (dry vs. wet foam)
- Modular components to alter flow rates
- Heavy duty, durable construction
- Lockable stainless-steel cover
- Includes pressure gauges for air/water
- Large stainless steel ball valves at inlet and outlet with ½” NPT connections
Options
- Spray Wand
- Default = polypropylene
- Stainless upgrade available
- Nozzle
- Default = Fan
- Jet nozzle upgrade available
What's in the box?
- Stainless Steel Venturi Foamer (2x) each with V14 venturi insert (1.4 GPM)
- 3/4" x 50' blue hose (2x)
- 10” polypropylene spray wand with fan nozzle - stainless wand upgrade and/or jet nozzle available (2x)
- Stainless steel mounting bracket and cover
- Color coded metering tips (2x sets of 22 metering tips, including driver)
- 6' suction line with mesh screen and ceramic weight (2x)
Install
- Mount system to suitable surface using included bracket (i.e. wall or mounting board)
- Connect the discharge hose and wand assembly (included) to the dispense/discharge port at the bottom of each system (red for sanitizer, blue for foam)
- Connect water supply to top of each unit (1/2” NPT)
- Connect air to foamer (1/4" NPT)
- Install metering tips to each individual hose barb
- Install chemical suction lines (included)
- Verify pressure setting for optimal flow rates
- Open ball valves as necessary for each system to foam and sanitize from one location
Specifications
|
Dimensions |
20-1/4" x 17-3/8” x 6” |
|
Water Temperature |
up to 160°F |
|
Water Pressure |
35-125 PSI |
*Flow rate and CFM will vary depending on insert size.
