SLX Pump Fed Sanitize, Boosted Pressure Rinse & Foam, Multi-Station - Polypropylene

SLX Pump Fed Sanitize, Boosted Pressure Rinse & Foam, Multi-Station - Polypropylene

The SLX Sanitize, Rinse & Foam multi-station is the most complete, all-in-one set up for cleaning and sanitizing industrial processing equipment using multiple ready to use (RTU) cleaning solutions from one location with separate discharge hoses. This custom configurations features decentralized sanitizer spray and foam bodies (35-125 PSI) with a boosted pressure rated rinse station (125 - 350 PSI).

This low to medium volume centralized cleaning and sanitation system uses a pump to supply cleaning solutions and sanitizers, independently, to foam and sanitizer proportioners. All three systems (sanitizer, rinse station and foamer) are securely mounted onto a stainless-steel wall bracket for easy installation. The mount features a large door to cover critical components, there is also a padlock hole to restrict access if necessary.

The sanitizer and foamer system features the same split body design as our single station set-ups to make servicing and maintenance a breeze. Just unclamp the two sections using the stainless-steel tri-clamp to separate the upper and lower halves to gain access to the venturi insert cartridge.

Features

• Boosted pressure rinse station (125 - 350 PSI)
• Split body design for easy servicing and maintenance (patent pending)
• Tool free disassembly (even the check valves and plumbing components)
• Large fan nozzle for efficient foam spray coverage
• Modular components to alter flow rates
• Heavy duty, durable construction
• Lockable stainless-steel cover
• Includes pressure gauges for water
• Large stainless steel ball valves at inlet and outlet with ½” NPT connections

Options

• Spray Wand (foamer and sanitizer only)
  • Default = polypropylene
  • Stainless upgrade available
• Nozzle (foamer only)
  • Default = Fan
  • Jet nozzle upgrade available

What's in the box?

• Polpypropylene Pump Fed Sanitizer with P21 flow restritor insert (2.1 GPM) and 1/2" x 50' red hose
  
  • 10” polypropylene spray wand with fan nozzle - stainless wand upgrade also available
•  Boosted Pressure Stainless Steel Rinse station (13.1 GPM) with 1/2" x 50' blue boosted pressure hose
  
  • Adjustable spray handle 
• Polpypropylene Pump Fed Foamer with P21 flow restritor insert (2.1 GPM) and 3/4" x 50' blue hose
  • 10” polypropylene spray wand with fan nozzle - stainless wand and jet nozzle upgrade also available
• Stainless steel mounting bracket and cover

Install

1. Mount system to suitable surface using included bracket (i.e. wall or mounting board)
2. Connect the discharge hose and wand assembly (included) to the dispense/discharge port at the bottom of each system (red for sanitizer, white for rinse, blue for foamer)
3. Connect pump supply (35 - 125 PSI) to top of each unit (1/2” NPT)
4. Connect boosted water (125 - 350 PSI) to the top of the rinse station (1/2" NPT)
5. Connect air to foamer (1/4" NPT)
6. Verify pressure setting for optimal flow rates
7. Open ball valves as necessary for each system to foam, rinse, and sanitize from one location

Specifications

*Flow rate and CFM will vary depending on insert size.