SLX Entryway Pump Fed Foamer - Satellite

Clean Logix

No reviews yet Write a Review


SLX-ES-PF Entryway Pump Fed Foamer - Satellite

The SLX-ES-PF is a Satellite entryway foam applicator to add onto existing SLX Entryway Timers. The system is intended for applying foamed cleaning solution or sanitizer to the floor of a door or entryway to help prevent cross contamination. The system works with a variety of pumps to deliver centralized, ready to use (RTU) product to the foamer. Air is injected into the foamer body to produce thick, clinging foam to ensure floor coverage of doorways from 3 foot wide standard doors up to 16 foot wide overhead doors.

The foamer is activated using an existing timer system which can be controlled and modified using a touchscreen interface to adjust interval settings and also enable “boost” functionality to increase the spray frequency for when it matters most. Up to 5 Satellite foamers can be connected to a single SLX-ET Entryway Controller to simultaneously activate 6 systems at once (single zone).

Timed Controller is not included with Satellite units. See SLX-ET-PF for more information.


  • Adjustable consistency (dry vs. wet foam)
  • Split body design for easy servicing and maintenance (patent pending)
  • Tool free maintenance
  • Heavy duty, durable construction

What's in the box?

  • Pump Fed Foamer with polypropylene body and PVC insert (insert size varies depending on flow rate)
  • Stainless steel mounting bracket with lockable door
  • 10' blue discharge hose
  • Polypropylene foam spreader nozzle with wall bracket
    • High flow P46 units (4.6 GPM) receive 2 nozzles for spraying each side of large overhead doors


  1. Mount foamer to suitable surface (i.e. wall or mounting board)
  2. Install nozzle(s) near floor, angled at the doorway area for foam application (spray pattern size will vary based on model)
  3. Connect the hose to the foamer's dispense port and spread nozzle 
  4. Connect pump supply to the strainer at the top of the foamer
  5. Connect air to the solenoid on the timer controller to be paired with (6 foamers per controller)
  6. Press Start
  7. Verify pressure setting for optimal flow rate
  8. Start foaming!



10-3/8” x 19-1/4” x 7-3/8”

Flow Rate*

1.4 - 4.6 GPM

Water Temperature

up to 140°F

Pump Pressure

35-125 PSI

Air Pressure

40 PSI (up to 5 CFM**)

*Flow rate and CFM will vary depending on insert size.
**Air pressure recommended 40PSI, adjust for foam quality.

Venturi Insert Sizes

Insert #

Water Flow Rate (@40 PSI)

Hose Size

Foam Floor Coverage



1.4 GPM

3/4" x 10'

3 ft. x 3 ft.

1x Low Flow


2.1 GPM

3/4" x 10'

6 ft. x 6 ft.

1x Medium Flow


4.6 GPM

1” x 10'

8-16 ft. x 8 ft.

2x High Flow


Extra Information

Clean Logix