SLX Pump Fed Sanitize & Foam Multi-Station - Polypropylene, with Quick Disconnects

Clean Logix

No reviews yet Write a Review


SLX Pump Fed Sanitize & Foam Multi-Station - Polypropylene (with Quick Disconnect)

The SLX Sanitize and Foam multi-station provides an all-in-one cleaning system for industrial processing equipment using ready to use (RTU) cleaning solutions (35-125 PSI) from one hose drop location with quick disconnect fittings. 

This low to medium volume centralized cleaning and sanitation system uses a pump supply ready to use, pre-diluted cleaning solutions to a polypropylene foam and sanitizer proportioner, each individually. Both the foamer and sanitation system are securely mounted onto a stainless-steel wall bracket for easy installation. The mount features a large door to cover critical components, there is also a padlock hole to restrict access if necessary.

The foamers feature the same split body design as our single station set-ups to make servicing and maintenance a breeze. Just unclamp the two sections using the stainless-steel tri-clamp to separate the upper and lower halves to gain access to the venturi insert cartridge.


  • Split body design for easy servicing and maintenance (patent pending)
  • Tool free disassembly (even the check valves and plumbing components)
  • Large fan nozzle for efficient foam spray coverage
  • Modular components to alter flow rates
  • Heavy duty, durable construction
  • Lockable stainless-steel cover
  • Includes pressure gauges for water
  • Large stainless steel ball valves at inlet and outlet with ½” NPT connections
  • Stainless steel quick disconnect fittings for hose management


  • Spray Wand
    • Default = polypropylene
    • Stainless upgrade available
  • Nozzle (foamer only)
    • Default = Fan
    • Jet nozzle upgrade available

What's in the box?

  • Polypropylene Pump Fed Foamer with P21 flow restrictor insert (2.1 GPM) and 3/4" x 50' blue hose with 3/4" quick disconnect fitting
    • 10” polypropylene spray wand with fan nozzle - stainless wand and jet nozzle upgrade also available
  • Polpypropylene Pump Fed Sanitizer with P21 flow restritor insert (2.1 GPM) and 3/4" x 50' red hose with 1/2" quick disconnect fitting
    • 10” polypropylene spray wand with fan nozzle - stainless wand upgrade also available
  • Stainless steel mounting bracket and cover


  1. Mount system to suitable surface using included bracket (i.e. wall or mounting board)
  2. Connect the discharge hose and wand assembly (included) to the dispense/discharge port at the bottom of each system (red for sanitizer, blue for foamers)
  3. Connect pump supply to top of each system (1/2” NPT)
  4. Verify pressure setting for optimal flow rates
  5. Open ball valves as necessary for each system to foam, rinse, and sanitize from one location



15” x 17-3/8” x 6”

Max Temperature


Pump Pressure

35-125 PSI

*Flow rate and CFM will vary depending on insert size.

Extra Information

Clean Logix

Warranty Information

1 year manufacturer warranty against defects and damaged parts.